24 dB Low Pass 1 (VCF1)Module A-120 is a voltage-controlled 24 dB low-pass filter, which filters out the high frequency components from a sound spectrum while allowing the low frequencies to pass unhindered. The cut-off...
Sampler / Wavetable moduleThe A-112 Module is a combined module of a voltage-controlled 8-bit sampler and a wavetable oscillator. Moreover, it is able to produce effects. It is available as a supplemental sound...
Multi-Connector (2x 4 multi-port distributors)The A-180 module is a simple, passive multiple distributor. It contains two groups, each with 4 connected sockets, so that you can "multiply" the input or output of a...'
Eurorack Module Voltage-controlled 24 dB low-pass filter, Cut-off frequency can be set manually or via control voltages, Two CV inputs, Power requirement: +20 mA (+12 V) / -10 mA (-12 V), Dimensions: 8 TE / 8 HP / 40.3...
Low-Pass Filter 6 / 12 / 24 / 48 dB Module A-108 is a completely new voltage-controlled low pass / band pass filter based on the well-known transistor ladder (Moog ladder). The module has an internal 8-stage low-pass...
Euro Rack Module Provides 3 adjustable DC voltages, Adjustable voltage range: 0 - 5 V or -2.5 to 2.5 V, Euro rack format, Width: 8 HP, Depth: 40 mm, Power consumption: +20 mA (+12V)/ -10 mA (-12V)
ADSR Envelope Generator The module A-140 is a envelope generator and since it delivers control voltages, belongs to the modulation-modules. As soon as the ADSR is triggered at gate-input, it generates an adjustable...
24 dB Low Pass Filter SSM Based on the chip SSM2044, Width: 8 TE / 8 HP / 40.3 mm, Depth: 45 mm (measured from the rear of the front panel), Power Requirements: 30 mA (12 V) / A -20 m (-12 V)
Bus Access Module (BAC) An active bus access module (BAC) to feed CV and gate into the bus via a jack plug (ex., with several A-100 racks or an external MIDI-CV / gate interface), Alternatively, the module can also be...
Low Frequency Oscillator 2 With adjustable waveform, 3 outputs, Frequency range selectable, Eurorack format, Width: 8 HP, Depth: 45 mm, Power requirement: +20 mA (+ 12V) / -20 mA (-12V)